Low Price Industrial Water Cooler FRP Open Cross Flow Cooling Tower for Ice Cream Factory Use

Product Description

Main Configuration

1. Tower Casing & Support Frame
High-strength FRP shell, excellent anti-aging, sun-proof and anti-corrosion performance, not easy to crack or fade. All load-bearing frames, brackets and fasteners are hot-dip galvanized or made of stainless steel, with strong structural strength and long service life.
2. Cross-Flow Fill Media
Special cross-flow PVC fill is adopted, with large specific surface area and good hydrophilicity. It features low airflow resistance, uniform water spreading, no deformation or clogging after long-term use, and outstanding heat exchange effect.
3.  Water Distribution System
Equipped with low-resistance water distribution pipes and anti-clogging nozzles. The water supply is stable, water distribution is even without dead zones, and the overall water head loss is small.
4.  Fan & Driving System
Top-mounted axial flow fan with large air volume and low noise. The matched motor reaches IP55 protection grade, waterproof and dustproof, suitable for outdoor long-term operation. A speed reducer dedicated to cooling towers is equipped for stable transmission and low failure rate. Variable frequency motors are optional for energy-saving operation.
5.  Drift Eliminator
High-efficiency multi-fold drift eliminator is installed above the water distribution area, which effectively intercepts water droplets, greatly reduces water drift loss and saves water resources.
6.  Water Basin
Integral FRP or stainless steel water basin at the bottom, good anti-leakage performance. Standard interfaces for water supply, overflow and drainage are reserved for easy pipeline connection.
7.  Air Inlet Louver
FRP air inlet louvers are installed on both sides, which can prevent water splashing, block external sundries, and protect internal components.

Product Description

The open type cross-flow cooling tower is a mainstream evaporative cooling device. Different from counter-flow towers, hot water flows down vertically inside the tower, while air passes horizontally through the fill media on both sides, forming a cross-flow heat exchange mode. It features rational internal layout, large air intake area and smooth air circulation.
The whole machine adopts modular design, mostly equipped with FRP shell and reliable metal supporting structure. It has the advantages of low water resistance, stable water distribution, low operating noise and convenient maintenance. This product occupies a small floor space and runs reliably for a long time, which is widely used in commercial air conditioning and general industrial circulating water cooling systems.

Application Fields 

Commercial HVAC: Central air conditioning systems for hotels, hospitals, shopping malls, office buildings, residential communities, theaters and other public buildings.
General Industry: Machinery manufacturing, metal processing, plastic injection, textile, printing and dyeing, paper making and light industry.
Food & Pharmaceutical: Production cooling systems for food processing, beverage production and pharmaceutical factories.
Energy & Power: Auxiliary cooling equipment for power stations and transformer rooms.
Chemical Industry: Cooling systems for general chemical enterprises with mild corrosive water quality.
Other Scenarios: Water treatment stations, large supermarkets, industrial parks and other places needing circulating water cooling.

Product Advantages

Excellent Cooling Performance: Cross-flow structure brings large contact area between water and air, low flow resistance and high heat exchange efficiency.
Low Operation Noise: Optimized fan and internal structure, running quietly, friendly to the surrounding environment.
Easy Maintenance: The side open design makes it convenient to inspect, clean fill media and maintain internal parts.
Energy & Water Saving: Low water head loss, low water consumption; optional frequency conversion system to reduce power consumption.
Strong Adaptability: FRP body and anti-corrosion accessories, suitable for most conventional industrial water quality and outdoor working conditions.
Flexible Combination: Modular unit design, can be combined and expanded freely according to cooling capacity requirements.

Specifications & Parameters

Model	Width(mm)	Length(mm)	Fan Diameter(mm)
HBLCD-250	3210	5830	2800*1
HBLCD-300	3510	6030	3000*1
HBLCD-350	3500	6340	3200*1
HBLCD-400	3810	6460	3400*1
HBLCD-450	4400	6880	3800*1
HBLCD-500	6420	5830	2800*2
HBLCD-600	7020	6030	3000*2
HBLCD-700	7000	6340	3200*2
HBLCD-800	7420	6460	3400*2
HBLCD-900	8800	6880	3800*2
HBLCD-1000	10530	6030	3000*3
HBLCD-1050	10500	6340	3200*3
HBLCD-1200	11430	6460	3400*3
HBLCD-1350	13200	6880	3800*3

ISO 9001 Certified

Workshop Production Site

Company Profile

Anqiu City Cooling Tower Factory

Anqiu City Cooling Tower Factory is a leading Chinese cooling tower equipment manufacturer with over 40 years of professional experience. We are ISO 901 certified and export to more than 50 countries, providing reliable cooling tower equipment supported by R&D innovation and strict quality control.

Why Choose Us?

Other Products

Competitive pricing & bulk discounts
Fast shipping & customs clearance support
Turnkey project solutions

Closed Cooling Tower
FRP products
Open Type Cooling Tower

FAQ

Q: What's the lead time for orders?
A: Standard models ship in 15–30 days; customized units require 30–45 days.
 
Q: Do you provide after-sales service overseas?
A: Yes, we have partnered service centers in key regions.
 
Q: Can I request a customized bucket size?
A: Absolutely! We offer tailored attachments.
 
Q: What documents do you provide for export?
A: Full export package (Commercial Invoice, Packing List, Bill of Lading, COC, etc.).
 
Q: How do I place an order?
A: Contact us via email/phone for a quote, then confirm with a PO.